Parts in Cellhone and its Usage:

There are many parts in a cellphone. This parts is different from one company to the other company according to the size of the mobile. In before days they used many parts in a cellphone each parts helps in different ways. But nowadays they have introduced a single chip which is used to do the work of more than three Chips. So the size of the circuit board comes less and the handset of the cellphone is comes too less. The major parts of the cellphones are described below.

1. Resistor: Its frequency is ohms. It is used to reduce the voltage. It has nine types of Colours. It oppose both the A/C and DC Voltage. If the Voltage is passed means the Resistor will act. If not the Voltage will not pass.

2. Capacitor: Its frequency is fereds it is the highest. The lowest frequency is lowest. It allows A/c and it blocks the DC Current. The Capacitor has conductor and insulator. The Conductor it allows the electricity. The insulator it does not pass electricity.

3. Current: It is nothing but power supply. Two types of Current A/C and D/C

4. Voltage: Two types of Voltage A/C and D/C

5. Coil: It is used to remit some voltage only if there is any magnetic. If the magnet is there means the magnetic field will bouch the coil and then the voltage will be formed in a coil. It is nothing but to remit some Voltage.

6. Transformer: It is nothing but the coil according to the activation of it.

7. Diode: The Diode is nothing but emiting lights positive(+) and negative(-). It has anode and cathode. It allows Dc and it oppose A/C according to the frequency of it. There are three types of Diode.

a) Dennel Diode
b) Led Diode
c) Tunnel Diode.

These are all the main parts of the cellphone which is used to work and communicate with each other with the help of frequency..